Vento by A.E.B.

Indirect sequential injection systems electronic kits

The series of electronic control units Vento, by AEB, are designed for LPG or CNG applications on multipoint engines from 3 to 10 cylinders.

During gas operation, based on the petrol injection time, the gas pressure and temperature, the control unit calculates the amount of equivalent gas that must be injected in the gas phase into the intake duct to have the same engine performance as would have petrol.

The OBD versions, thanks to the communication with the OBD protocol from the original petrol control unit, adapt the system so as to compensate for drifts and aging of the gas components.

All units are equipped with a diagnostic system for all gas components, to avoid any malfunction problems and facilitate any technical interventions

Available versions

  • MP 32 (4 - not OBD)
  • MP 48 (4 - not OBD)
  • MP 48 (4 - OBD)
  • MP6C (5/6 - OBD)
  • 2568 D (6/8 OBD)
  • 2010 (10 not OBD)

Technical characteristics

HomologationECE 67R-01 / ECE R110 / ECE 10R-03
Supply Voltage10 - 16 Volts CC
Working temperature-40 / + 110 °C
Current absorbed stand-by (key off)<5uA
Current absorbed no loads (key on)Imax=0.5A
Lock-off load on single inputPmax=25W, Imax=2A
Inputs lock-off services2
Water/gas temp. sensors managed4K7
LPG/CNG level sensors managed0..5 V
110..0 Ohm
Managed Lambda Sensor0-0,8